|
|
Email |
: |
ielinyc@cc.ncue.edu.tw |
|
學歷 |
: |
中華民國國立交通大學機械工程研究所博士1988/09_1992/02
中華民國國立交通大學機械工程研究所碩士1986/09_1988/06
中華民國國立彰化師範大學工業教育學系學士1979/09_1983/06 |
經歷 |
: |
台灣鍍膜科技協會理事2012/01-
彰化縣SBIR計畫主審 2014/08-
科技部中科前瞻計畫評審 2015/09
工研院專利維護審查委員 2016/07-
科技部工程司材料學門複審委員 2010/3 -2012/3
國立彰化師大特聘教授 2012/08-2018/08
Guest editor Thin Solid Films 2017/10, 2019/10
|
研究領域 |
: |
1. 薄膜工程
2. CIGS薄膜太陽電池材料與製程
3. 材料工程 |
期刊論文 |
: |
2022 |
SCI |
Yi-Cheng Lin,Yu-Kai Fei, Yu-Jen Hung,Reducing the formation of Sb2O3 phase and selenium vacancy in Sb2Se3 thin film solar cells via hydrogen-assisted selenization, Solar Energy Materials and Solar Cells, 236(2022) 111520 (impact factor 7.267) |
|
2022 |
SCI |
Wei-Jhe Syua, Rui-Yun Hsu, Yi-Cheng Lin, Growth and photovoltaic device using Cu3VS4 films prepared via co-sputtering from Cu-V and V targets, Materials Chemistry and Physics, 277(2022) 125547 (impact factor 4.094) |
|
2022 |
SCI |
Yung-Lin Chen, Yi-Cheng Lin, Wan-Yu Wu, Mo Contact via High-Power Impulse Magnetron Sputtering on Polyimide Substrate, Coatings, 2022, 12(1), 96; (impact factor 2.881) |
|
2022 |
SCI |
Yi-Cheng Lin, Jun-Han Lin, Rui-Yun Hsu, Vanadium-doped indium tin oxide window layer in Sb2Se3 solar cell, Journal of Physics and Chemistry of Solids, 165 (2022) 110661. (impact factor 3.995) |
|
2022 |
SCI |
Yu-Jen Hung, Yi-Cheng Lin, Study on Na-Ga-F compound in CIGSSe absorber prepared by CuGa-NaF target, Materials Science in Semiconductor Processing, 147 (2022) 106722 (impact factor 3.927) |
|
2019 |
SCI |
Yi‑Cheng Lin, Ya‑Ru Hsu, Mechanism study of Zn/Sn ratio on the MoSe2 formation in Zn‑rich Cu2ZnSnSe4 absorber layer, Journal of Materials Science: Materials in Electronics, 30(2019) 17540-17546 ( impact factor 2.478) |
|
2019 |
SCI |
Yi-Cheng Lin, Kuan-Ting , Tung-Po Hsieh, Hung-Ru Hsu, Improving Ga distribution and efficiency of flexible Cu(In,Ga)(S,Se) solar cell using CuGa:Na target route, Materials Science in Semiconductor Processing, 94 (2019) 151-155. (impact factor 3.927, cited No. = 2) |
|
2018 |
SCI |
Yi-Cheng Lin and Zih-Yi Su, Tin-Selenium Secondary Phase Etching of Cu2ZnSnSe4: A Selective Removal Route To Improve Solar Cell Efficiency, ACS Applied Energy Materials, 2018, 1(12), 6725-6729. (impact factor 6.024, cited No. =5) |
|
2018 |
SCI |
Yi-Cheng Lin, Siang-Jin Wei, Yuan-Jun Liang, Wei-Jhe Syu, A simple non-toxic simultaneous selenization/sulfurization process for Cu(In,Ga)(S,Se)2 solar cells, Materials Chemistry and Physics, 219 (2018) 283-291 (impact factor 4.094, cited No. = 2) |
|
2018 |
SCI |
Lin Yi-Cheng, Chen Heng-Jhih, Cu(In,Sn)Se2 thin films for absorption of energy from infrared radiation, Chinese Journal of Physics 56 (2018) 2022-2030.(impact factor 3.237, cited No. = 1) |
|
2018 |
SCI |
Yi-Cheng Lin, Li-Ching Wang, Kuan-Ting Liu, Ya-Ru Syu, Hung-Ru Hsu, A comparative investigation of secondary phases and MoSe2 in Cu2ZnSnSe4 solar cells: effect of Zn/Sn ratio, Journal of Alloys and Compounds, 743 (2018) 249-257. (impact factor 5.316, cited No. = 12) |
|
2018 |
SCI |
Li-Ching Wang, Yi-Cheng Lin, Hung-Ru Hsub, Improving the efficiency of a Cu2ZnSn(S,Se)4 solar cell using a non-toxic simultaneous selenization/sulfurization process, Materials Science in Semiconductor Processing, 75 (2018) 84-94. (impact factor 3.927) |
|
2017 |
SCI |
Yi-Cheng Lin, Xiao-Cun Wei, Hybrid silver nanowires/nanogold particles film for a Cu(In,Ga)Se2 thin film solar cell, Chinese Journal of Physics 55 (2017) 1219-1224.(impact factor 3.237, cited No. = 2) |
|
2017 |
SCI |
Yi-Cheng Lin, Chien-Mu Lai, Hung-Ru Hsu, Impact of sodium on the secondary phases and current pathway in Cu2(Zn,Sn)Se4 thin film solar cell, Materials Chemistry and Physics, 192 (2017) 131-137 (impact factor 4.094, cited No. = 11) |
|
2017 |
SCI |
Yi-Cheng Lin, Jyun-Ting Huang, Li-Ching Wang, and Hung-Ru Hsu, Effect of Cu/(In Ga) ratios on the secondary phases and the performance of Cu2InGa(S,Se)4 thin film solar cells, Journal of Alloys and Compounds, 690 (2017) 152-159 (impact factor 5.316, cited No. = 9) |
|
2016 |
SCI |
Yi-Cheng Lin,Ding-Hao Hong, Yin-Ting Hsieh, Li-Ching Wang,and Hung-Ru Hsu, Role of Mo:Na Layer on the Formation of MoSe2 Phase in Cu(In,Ga)Se2 Thin Film Solar Cells, Solar Energy Materials |
|
2016 |
SCI |
Yi-Cheng Lin, Yin-Ting Hsieh, Chien-Mu Lai, and Hung-Ru Hsu, Impact of Mo barrier layer on the formation of MoSe2 in Cu(In,Ga)Se2 solar cells, Journal of Alloys and Compounds, 661(2016), 168-175 (impact factor 5.316, cited No. = 25) |
|
2016 |
SCI |
Yi-Cheng Lin, Kun-Hsin Lu, Jhih-Jhong Chen, Characterizing the electrical and optical properties of AZO/AgPd/AZO multilayer film using RF magnetron sputtering, Chinese Journal of Physics 54 (2016) 475-482.(impact factor 3.237, cited No. = 5) |
|
2015 |
SCI |
Li-Ching Wang, Yi-Cheng Lin, Effect of the stacked structure on performance in CZTSSe thin film solar cells, 2015, Applied Surface Science, Accepted. (impact factor 2.538) |
|
2014 |
SCI |
Yi-Cheng Lin, Yen-Tai Chao, Pin-Chuan Yao, Influence of humidity on the growth characteristics and properties ofchemical bath-deposited ZnS thin films, Applied Surface Science 307 (2014) 724–730 (impact factor 2.538) |
|
2014 |
SCI |
Wang, Y.M. and Ko, M.Y., "The interaction dynamics of a vehicle traveling along a simply supported beam under variable velocity condition," Acta Mechanica, Vol. 225, 2014, pp. 3601-3616 (SCI). |
|
2013 |
SCI |
Yi-Cheng Lin, Xiang-Yu Peng , Li-Ching Wang, Yao-Leng Lin, Cheng-Han Wu, Shih-Chang Liang, Residual stress in CIGS thin film solar cells on polyimide:simulation and experiments, J Mater Sci: Mater Electron, DOI 10.1007/s10854-013-1610-7(I.F.=1.966) |
|
2013 |
SCI |
Chia-Huang Shen, Yi-Cheng Lin, 2013.03, Preparation and characterization of Cu(In,Ga)Se2 thin film solar cell by printing technique with powders of quaternary alloy and NaF, Journal of Materials Science: Materials in Electronics, 2013, 24(8), pp 2906-2912 . (I.F.=1.966) |
|
2013 |
SCI |
Yi-Cheng Lin,Yi-Ting Chen;Pin-Chuan Yao, Effect of post-heat-treated NiOx overlayer on performance of nanocrystalline TiO2 thin films for dye-sensitized solar cells, Journal of Power Sources, 240 (2013) 705-712,(I.F.= 5.211). |
|
2013 |
SCI |
Yi-Cheng Lin , Xu-Jing Yao, Li-Ching Wang, Jyh-Ming Ting, Improving simultaneous crystallization and Ga homogenization in Cu(In,Ga)Se2 film using an evaporated In film, Journal of Alloys and Compounds 572 (2013) 31–36 (I.F.= 2.726) |
|
2012 |
SCI |
Lin Yicheng, Shi Guanyu, Shi Zonhong, Lin Yaoleng, Wu Chenghan, Liang Shihchang, Effects of Deflection on the SiO2 Barrier Layer and Mo Back Electrode of Cu(In,Ga)Se2 Thin-Film Solar Cells on Stainless Steel Substrates, Rare Metal Materials and Engineering, 41(S1) (2012) (impact factor 0.230) |
|
2012 |
SCI |
Y. C. Lin, Z. Q. Lin; C. H. Shen; L Q. Wang; C. T. Ha; Chris Peng, Cu(In,Ga)Se2 films prepared by sputtering with a chalcopyrite Cu(In,Ga)Se2 quaternary alloy and In targets, Journal of Materials Science: Materials in Electronics, Volume 23, Issue 2, pp 493-500 (impact factor 1.020) |
|
2012 |
SCI |
Y. C. Lin, T. Y. Chen, L. C. Wang, S. Y. Lien, Comparison of AZO, GZO, and AGZO thin films TCOs applied for a-Si solar cells, Journal of The Electrochemical Society, 159(6), H599-H604 (2012) (impact factor 2.859) |
|
2012 |
SCI |
Y. C. Lin • Y. Y. Tu • C. H. Shen, Na-doped Mo target sputtering for Cu(In,Ga)Se2 thin film solar cells, J Mater Sci: Mater Electron, J Mater Sci: Mater Electron (2013) 24:514–519 |
|
2012 |
SCI |
Chia-Huang Shen, Yi-Cheng Lin*, Wang-Lin Liu,Chemical resistance properties of molybdenum back electrodes used in non-vacuum Cu(In,Ga)Se2 thin film solar cell, Vacuum 86 (2012) 2136-2139,(impact factor 1.120) |
|
2012 |
SCI |
Y. C. Lin, Z. A. Chen, and C. H. Shen, Novel Optical Thin Film Color Filter: Simulation and Experiment, Chinese Journal Physics, 50(4), p.642-650. (impact factor 0.444) |
|
2012 |
SCI |
9.Y. C. Lin, T. Y. Chen, L. C. Wang, S. Y. Lien, Comparison of AZO, GZO, and AGZO thin films TCOs applied for a-Si solar cells, Journal of The Electrochemical Society, 159(6), H599-H604 (2012) (impact factor 2.859, cited No. = 12) |
|
2011 |
SCI |
Y. C. Lin,, J. H. Ke, W. T. Yen, S. C. Liang, C. H. Wu ,and C. T. Chiang, 2011, Preparation and characterization of Cu(In,Ga)(Se,S)2 films without selenization by co-sputtering from Cu(In,Ga)Se2 quaternary and In2S3 targets, Applied Surface Science, 257, p.4278-4284. (impact factor 2.103, cited No. = 21) |
|
2011 |
SCI |
Y. C. Lin, Z. Q. Lin; C. H. Shen; L Q. Wang; C. T. Ha; Chris Peng, 2011, Cu(In,Ga)Se2 films prepared by sputtering with a chalcopyrite Cu(In,Ga)Se2 quaternary alloy and In targets, Journal of Materials Science: Materials in Electronics, 23, p.493-500, (impact factor 1.020, cited No. = 4) |
|
2011 |
SCI |
Y. C. Lin, J. H. Ke, W. T. Yen, S. C. Liang, C. H. Wu ,and C. T. Chiang, Preparation and characterization of Cu(In,Ga)(Se,S)2 films without selenization by co-sputtering from Cu(In,Ga)Se2 quaternary and In2S3 targets, Applied Surface Science, 257 (2011) 4278-4284. (impact factor 2.112, cited No. = 21) |
|
2010 |
SCI |
Y. C. Lin, C. H. Chang, C. H. Shen, P. W. Wang and Y. C. Lee, 2010. 05, The characteristics of chemical and heat stability properties of chromium- vanadium- aluminum co-doped zinc oxide films for dye-sensitized solar cells, Thin Solid Films, 518, 6055-6060 (impact factor 1. 89) |
|
2010 |
SCI |
Y. C. Lin, B. L. Wang, W. T. Yen, C.T. Ha and Chris Peng, 2010. 4, Effect of process conditions on the optoelectronic characteristics of ZnO:Mo thin films prepared by pulsed direct current magnetron sputtering, Thin Solid Films, 518, 4928–4934, (impact factor 1. 89) |
|
2010 |
SCI |
C.-J. Tong, Y.-C. Cheng, M.-T. Lin, Kuan-Jung Chung, J.-S. Hsu, and C.-L. Wu, " Optical Micro-peddle Beam Deflection Measurement for electrostatic mechanical testing of Nano-scale Thin Film Application to MEMS,” Microsystem Technologies, Vol.16, No.7, pp.1131-1137, Jul. 2010. (IF: 0.827, Ranking: 152/242 of Engineering, Electrical, and Electronic subject by 2012 JCR, 5-year IF: 0.900.) |
|
2010 |
SCI |
C.-J. Tong, Y.-C. Cheng, M.-T. Lin, Kuan-Jung Chung, J.-S. Hsu, and C.-L. Wu, " Optical Micro-peddle Beam Deflection Measurement for electrostatic mechanical testing of Nano-scale Thin Film Application to MEMS,” Microsystem Technologies, Vol.16, No.7, pp.1131-1137, Jul. 2010. (IF: 0.827, Ranking: 152/242 of Engineering, Electrical, and Electronic subject by 2012 JCR, 5-year IF: 0.900.) |
|
2010 |
SCI |
W. T. Yen, Y. C. Lin*, and J. H. Ke, Surface textured ZnO:Al thin films by pulsed DC magnetron sputtering for thin film solar cells applications, Applied Surface Science, 15 2010, P. 960–968 (impact factor 2.103) (SCI) |
|
2009 |
SCI |
Y. C. Lin, M. Z. Chen, and C. C. Kuo, and W. T. Yen, 2009, “Electrical and Optical Properties of ZnO:Al Film prepared on Polyethersulfone Substrate by RF Magnetron Sputtering”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 337, 52-56. (impact factor 2.236).(SCI) |
|
2009 |
SCI |
W. T. Yen,Y. C. Lin, 2009, “A study on the bonding conditions and mechanism for glass-to-glass anodic bonding in field emission display”, Journal of Adhesion Science and Technology 23, 151-162 |
|
2009 |
SCI |
Y.C. Lin , J.H. Jiang, W.T. Yen, 2009.02, Effect of Cr and V dopants on the chemical stability of AZO thin film, Applied Surface Science 255 3629–3634. (impact factor 1436, cited No. = 3) |
|
2009 |
SCI |
18.Yi-Cheng Lin, Zi-Jie Gao, Zhi-An Chen, Wen-Tsai Yen, Jing-Pei Huang, 2009.10, A novel high transmittance color filter based on three layers inorganic thin film, Nanoscience and Nanotechnology Letters,1,1-3 |
|
2009 |
SCI |
Y. C. Lin, H.A. Chuang, J.H. Shen, 2009, “PZT thin film preparation by pulsed DC magnetron sputtering”Vacuum,83, 921-926. (impact factor 0.881) |
|
2008 |
SCI |
Y.C. Lin, C.R. Hong and H.A. Chuang, 2008, Fabrication and analysis of ZnO thin film bulk acoustic resonators. Applied Surface Science, 254, pp.3780-3786 (impact factor 1.436, cited No. = 8) |
|
2008 |
SCI |
Y.C. Lin, J.Y. Li and W.T. Yen, 2008, Low temperature ITO thin film deposition on PES substrate using pulse magnetron sputtering. Applied Surface Science, 254, pp. 3262-3268 (impact factor 1.436, cited No. = 30) |
|
2008 |
SCI |
Y.C. Lin, Y.C. Jian and J.H. Jiang, 2008, A study on the wet etching behavior of AZO(ZnO:Al) transparent conducting film. Applied Surface Science, 254, pp. 2671-2677 (impact factor 1.436, cited No. = 40) |
|
2007 |
SCI |
S. C. Chen, C. H. Cheng and Y. C. Lin, 2007, Fabrication of components for a valve-less micropump or microejector by multilevel electroforming technology, Microsystem Technologies, 13(5-6), pp.455-463, 2007. (impact factor 0.732, cited No. = 2) |
|
2007 |
SCI |
S. C. Chen, Y. C. Lin, J. C. Wu, L. Horng and C. H. Cheng, 2007, Parameter optimization for an ICP deep silicon etching system, Microsystem Technologies, 13(5-6), pp.465-474. (impact factor 0.732, cited No. = 10) |
|
2007 |
SCI |
S. C. Chen, C. H. Cheng, and Y. C. Lin, 2007, Analysis and experiment of a novel actuating design with the shear mode PZT actuator for microfluidic application, Sensors and Actuators A, 135, pp.1-9, 2007. (impact factor 1.462, cited No. = 10) |
|
2007 |
SCI |
C. H. Cheng, S. C. Chen, Z. X. Zhang and Y. C. Lin, 2007, Analysis and experiment for the deflection of a shear mode PZT actuator, Smart Material and Structure, 16, pp.230-236, (impact factor 1.67, cited No. = 4) |
|
2006 |
SCI |
C. H. Cheng, S. C. Chen and Y. C. Lin, 2006, A micropump for droplet ejection, Material Science Forum, 505, pp. 421-426 (impact factor 0.498, cited No. = 1) |
|
2006 |
SCI |
C. H. Cheng, S. C. Chen, S. W. Young and Y. C. Lin, 2006, Effect of poling conditions on the out-of-plane displacement for a shear mode PZT actuator, Sensors and Actuators A, 126(2), pp. 386-395. (impact factor 1.462, cited No. = 6) |
|
2006 |
SCI |
S. C. Chen, Y.C. Lin and C. H. Cheng, 2006, The numerical analysis of strain behavior at the solder joint and interface in a flip chip package, Journal of Materials Processing Technology, 171(1), pp. 125-131. (impact factor 0.615, cited No. = 11) |
|
2003 |
SCI |
Y. C. Lin, Y. T. Lin, S. C. Chen, and Z. R. Liu, 2003,01, “ Role of Retained Ferrite on the Thermal Fatigue Cracking Resistance in Martensitic Stainless Steel Weldment”, Materials Science and Engineering A, A339, pp.133-135. (SCI/EI)(cited No. = 3) |
|
2003 |
SCI |
Y.C. Lin and S. C. Chen, 2003.12, ”Effect of Residual Stress on the Thermal Fatigue in Type 420 Martensitic Stainless Steel Weldment”, Journal of Material Processing Technology, 138, pp.22-27. (SCI, cited No. = 22) |
| |
國際研討會論文 |
: |
2009 |
2 |
Wen-Tsai Yen, Jia-Hong Ke, Yi-Cheng Lin, 2009.12., “Influences on optoelectronic properties of surface textured of AZO and GZO for thin film solar cells applications”, Acceptance Letter of your abstract submitted to TACT 2009 Conference. Taipei. |
|
2009 |
2 |
Wen-Tsai Yen, Jia-Hong Ke, Yi-Cheng Lin, 2009.12., “Influences on optoelectronic properties of surface textured of AZO and GZO for thin film solar cells applications”, Acceptance Letter of your abstract submitted to TACT 2009 Conference. Taipei. |
|
2009 |
EI |
Wen-Tsai, Yen, Jia-Hong Ke, Hsin-Jung, Wang, Yi- Cheng, Linand Jung-Lung Chiang, 2009.04., “Influences on optoelectronic properties of damp heat stability of AZO and GZO for thin film solar cells” The 2nd International Conference on Multi-functional Materials and Structures. China. |
|
2008 |
2 |
Y. C. Lin* and W.Q. Shi “Effect of deflection on the mechanical and optoelectronic properties of ITO films deposited on PET substrates by pulse magnetron sputtering ”Thin Films 2008, 13th -16th July 2008, Singapore. |
|
2008 |
2 |
W. T. Yen, Yung-Lin Chen and Y. C. Lin*, 2008.10, “Optoelectronic and structural properties of ZnO:Ga thin films prepared by pulsed DC magnetron sputtering”, 36thInternational Conference On Metallurgical Coatings And Thin Films. USA. |
|
2008 |
2 |
Y. C. Lin* and W.Q. Shi “Effect of deflection on the mechanical and optoelectronic properties of ITO films deposited on PET substrates by pulse magnetron sputtering ”Thin Films 2008, 13th -16th July 2008, Singapore. |
|
2006 |
EI |
S. C. Chen, C. H. Cheng and Y. C. Lin, Analysis and experiment of diaphragm deflection by a shear mode PZT actuator in microfluidic application, The 19th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2006), January 22 - 26, 2006, Istambul, Turkey,(accepted) |
|
2006 |
|
S. C. Chen, C. Y. Kuo, Y. C. Lin, J. C. Wu and L. Horng, Parameter Investigation of Nano-sized Etching in an ICP Silicon Etching System, IEEE Conference on Emerging Technologies - Nanoelectronics, Jan. 10-13, 2006, Singapore (accepted) |
|
2005 |
|
S. C. Chen, C. H. Cheng and Y. C. Lin, Fabrication of components for a valve-less micropump or microejector by multilevel electroforming technology, 6th High Aspect Ratio Micro Structure Technology Workshop (HARMST 2005), June 10-13, 2005, Gyeongju, Korea, pp.59-60. |
|
2005 |
|
S. C. Chen, Y. C. Lin, J. C. Wu, L. Horng and C. H. Cheng, Parameter optimization for an ICP deep silicon etching system, 6th High Aspect Ratio Micro Structure Technology Workshop (HARMST 2005), June 10-13, 2005, Gyeongju, Korea, pp.184-185. |
|
2005 |
|
C. H. Cheng, S. C. Chen and Y. C. Lin, 2005, A micropump for droplet ejection, 2005 International Conference on Advanced Manufacture (ICAM2005), Nov. 28-Dec. 2, Taipei, Taiwan. |
|
2004 |
|
S. C. Chen, C. H. Cheng and Y. C. Lin, “The Numerical and Analytical Analysis of the Diaphragm Deflection Actuated by the Shear Mode Piezoelectric Actuator in Micropump”, Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT MNT 2004), July 4-7, 2004, Sapporo, Japan, pp.1186-1191 |
| |
國內研討會論文 |
: |
2005 |
|
M. Z. Chen, Y. C. Lin*, and C. C. Kuo, “Electrical and Optical Properties of ZnO:Al Film prepared on Polyethersulfone Substrate by RF Magnetron Sputtering” G-SA-X 1-3 2005 OPT 2005台灣光電科技研討會 |
|
2005 |
|
W. T. Yen , Y. C.Lin ,Y. T. Chien ,J. Y. Li ,Y. L. Wu, ”Anodic Bonding Technique for Field Emission Display Spacer Mounting”, 2005 EDMS,paper D -50,2005,Kaohsiung,Taiwan |
|
2005 |
|
K. M. Lin , Y. T. Chien, J. Y. Li, Y. L. Wu, Y. C. Lin, Q. F. Lin, “Patterning of ZnO:Al Thin Films”, 2005 EDMS,paper D -50,2005,Kaohsiung,Taiwan |
|
2005 |
|
吳憶麟、李智淵、簡毓蒼、林義成,“氧化鋅薄膜塊體聲波諧振器之研製與分析”,中華民國材料協會年會,paper 354,2005,台北,台灣 |
|
2005 |
|
李智淵、吳憶麟、簡毓蒼、林義成,”離子源表面處理效應對於銦鍚氧化物薄膜特性影響之研究”,中華民國材料協會年會,paper 273,2005,台北,台灣 |
|
2005 |
|
林葵棉、簡毓蒼、李智淵、吳億麟、林義成、林昆鋒,”射頻磁控濺法製備透明導電薄膜ZnO:Al”,中華民國材料協會年會,paper 500,2005,台北,台灣 |
|
2005 |
|
莊皓安、簡毓蒼、吳億麟、李智淵、林義成,矽基深蝕刻之參數探討,第 22 屆機械工程學會全國學術研討會, paper E3-012,2005,桃園,台灣 |
|
2005 |
|
S. C. Chen, C. H. Cheng, Z. X. Zhang and Y. C. Lin, Analysis and experiment of a shear mode pzt actuator, 中華民國力學學會第廿九屆全國力學會議, 新竹, 國立清華大學, 民國94年12月16-17日 |
|
2004 |
|
陳銘佐、郭晉全、林穀豐、林義成, 2004.12,”可撓式塑膠基板濺鍍透明導電膜AZO薄膜結構與光電性性質之研究”, 2004 台灣鍍膜科技研討會 |
|
2004 |
|
盧坤新、洪琮瑞、郭晉全、林義成, 2004.12, “射頻磁控濺鍍透明導電膜AZO/AgPd/AZO複層薄膜特性之研究”, 2004 台灣光電科技研討會 |
|
2004 |
|
嚴文材、林葵棉、洪琮瑞、林義成、, 2004.12,”電鑄鎳製作陣列式微奈米級孔洞之噴嘴片”, 中國機械工程學會第二十一屆全國學術研討會, pp.68-74 |
|
2004 |
|
林葵棉、嚴文材、洪琮瑞、林義成、, 2004.12,”TMAH 蝕刻島塊之實驗與模擬”, 中國機械工程學會第二十一屆全國學術研討會, pp.68-74 |
|
2004 |
|
林葵棉、嚴文材、洪琮瑞、林義成、, 2004.11,”無閥式微泵浦元件之電鑄製程”, 第四屆精密機械製造研討會, pp.68-74 |
|
2004 |
|
邱國麟、嚴文材、林義成,”濺鍍金屬膜於矽晶片與Pyrex 7740玻璃陽極接合之參數分析”,中華民國銲接協會九十三年銲接年會論文集,民國93年10月,pp.A102-A106,台北,台灣 |
|
2004 |
|
嚴文材、陳銘佐、林葵棉、林義成、曾光宏,”SUS 304薄板微雷射對接溫度場與應力場之有限元模擬分析”,中華民國銲接協會九十三年銲接年會論文集,民國93年10月,pp.A36-A41,台北,台灣 |
| |
專利 |
: |
2. 薄膜太陽電池撓曲物理特性及效率量測裝置,中華民國新型專利, TWM435728, 20120811 |
|
1.太陽能電池背電極製作方法,中華民國發明專利, TW201240131, 20121001 |
|
|
|