|
|
| Email |
： |
kjchung@cc.ncue.edu.tw |
|
| 學歷 |
： |
美國 馬里蘭大學 機械工程研究所 博士(主修:可靠度工程) 2000/08_2005/12
國立雲林科技大學 機械工程研究所 碩士1995/09_1997/06
淡江大學 機械工程系 學士1992/09_1994/06 |
| 經歷 |
： |
學術界:
國立彰化師範大學機電工程學系 副教授 2014/02~
國立彰化師範大學機電工程學系 助理教授 2006/08~2014/02
美國馬里蘭大學機械工程研究所 研究助理 2000/08~2005/12
國立雲林科技大學機械工程研究所 研究助理 1995/09~1997/06
淡江大學機械工程系 專任助教 1994/09~1995/07
SCI Journal Reviewer, Microelectronics Reliability, International Journal of Prognostics and Health Management, Journal of Electronic Packaging (ASME Trans), Optics & Laser Technology, Journal of Electronic Materials, Microelectronics International, Intermetallics, Optics and Lasers in Engineering, etc.
IEEE Member, 2008~
IEEE PHM Standard Working Group member (IEEE Standard Framework for Prognostics and Health Management of Electronic Systems)
Editorial board, International Journal of Prognostics and Health Management, 2008~
Technical Program Committee, International Microsystems, Packaging, Assembly and Circuits Technology (IMPACT) Conference, 2009~.
International Microelectronics Assembly and Packaging Society (IMAPS)~台灣國際微電子暨構裝學會會員(IMAPS Taiwan), 2009~
中華民國品質學會可靠度委員會委員, 99 年~
中華民國力學學會(STAM)永久會員, 98年~
工業界:
達興材料(股)公司，可靠度顧問，2014/10~2015/09
DELL Inc., Reliability Advisor 2006/04~2006/07
矽豐/矽品精密 研發部 高級工程師 1997/07~1999/02 |
| 研究領域 |
： |
元件/系統品質可靠度設計分析與驗證(FMEA, FTA, RBD, FRACAS/CAPA, Event Tree, ALT, FA, Prediction, etc)
光機電系統可靠度智能化診斷與預診管理(Intelligent Prognostics and Health Management, PHM)
Data Driven (AI-Machine Learning Based) Multi-Quality Targets Optimization
先進光機電生醫元件封組裝設計
光機電生醫材料性質測試驗證與失效分析
動力(電動車)鋰電池老化壽命加速測試智慧預測
雷射精密加工微電子/微機電元件 |
| 期刊論文 |
： |
| 2023 |
SCI |
Bing-Chen Gu, Kuan-Jung Chung, Bo-Wei Chen, Yu-Han Dai, Chia-Che Wu, “Electrochemical detection combined with artificial neural networks for the simultaneous intelligent sensing of caffeine and chlorogenic acid,” Electrochimica Acta, Vol. 463, Issue 20 Sep. 2023. (SCI, 2023 IF: 7.336; Ranking by Subjects: Chemical Engineering~ General Chemical Engineering 19/280) |
 |
| 2021 |
SCIE |
Ping Wun Huang, and Kuan-Jung Chung, “Task failure prediction for wafer-handling robotic arms by using various machine learning algorithms,” Measurement and Control, Vol. 55, Issue 3-4, pp.1-10, 2021. |
|
| 2019 |
SCI |
Yu-Chang Lin, and Kuan-Jung Chung, “Lifetime Prognosis of Lithium-Ion Batteries Through Novel Accelerated Degradation Measurements and a Combined Gamma Process and Monte Carlo Method,” Applied Sciences, Vol. 9, No. 3, pp. 559, 2019. |
|
| 2013 |
SCI |
Kuan-Jung Chung, Martin Peckerar, Joseph B. Bernstein, “Design Optimization of Laser-Induced Microbridges for Low Resistance Interline Connections in ICs,” Microelectronic Engineering, Vol. 103, pp. 70-75, 2013. (IF: 1.224, Ranking: 109/242 in Engineering, Electrical, and Electronic subject by 2012 JCR, 5-year IF: 1.283.) |
|
| 2013 |
SCI |
Yi-Cheng Lin,Yi-Ting Chen;Pin-Chuan Yao, Effect of post-heat-treated NiOx overlayer on performance of nanocrystalline TiO2 thin films for dye-sensitized solar cells, Journal of Power Sources, 240 (2013) 705-712,(I.F.= 5.211). |
|
| 2013 |
SCI |
Yi-Cheng Lin , Xu-Jing Yao, Li-Ching Wang, Jyh-Ming Ting, Improving simultaneous crystallization and Ga homogenization in Cu(In,Ga)Se2 film using an evaporated In film, Journal of Alloys and Compounds 572 (2013) 31–36 (I.F.= 2.726) |
|
| 2012 |
SCI |
Taco Chen, Ming-Tzer Lin, and Kuan-Jung Chung,” Linear Energy Control of Laser Drilling and Its Application in The Repair of TFT-LCD Bright Pixels,” Microsystem Technologies, Vol.18, No. 11, pp 1909-1915, 2012. (SCI, 2012 IF: 0.827) |
|
| 2011 |
3 |
鍾官榮、蔡銘吉、蕭玨騫，”溫度因子對磷酸鋰鐵電池充放電效能之影響初探，” 研究與創新，第12期，頁7-12，中華民國一百年一月。 |
|
| 2010 |
3 |
鍾官榮，”應用Norris-Landzberg加速壽命模型在球閘陣列封裝之可靠性評估，”興大工程學刊，第二十一卷，第二期，頁81- 87，中華民國九十九年七月。 |
|
| 2010 |
SCI |
Kuan-Jung Chung, and J. B. Bernstein,” Experimental Investigation of the Optimal Laser-Induced Microbridges, “ Precision Engineering, Vol.34, No. 3, pp. 578-585, Jul. 2010. (IF: 1.393, Ranking: 10/39 of Engineering, Manufacturing subject by 2012 JCR, 5-year IF: 1.782.) |
|
| 2010 |
SCI |
C.-J. Tong, Y.-C. Cheng, M.-T. Lin, Kuan-Jung Chung, J.-S. Hsu, and C.-L. Wu, " Optical Micro-peddle Beam Deflection Measurement for electrostatic mechanical testing of Nano-scale Thin Film Application to MEMS,” Microsystem Technologies, Vol.16, No.7, pp.1131-1137, Jul. 2010. (IF: 0.827, Ranking: 152/242 of Engineering, Electrical, and Electronic subject by 2012 JCR, 5-year IF: 0.900.) |
|
| 2009 |
3 |
鍾官榮，”胎壓監控系統之壽命測試與破壞分析，”中華民國微系統暨奈米科技協會會刊，第22期，頁44- 51，中華民國九十八年十二月。 |
|
| 2003 |
EI |
Kuan-Jung Chung, J. B. Bernstein, and L. Yang, “Experimental Study of EFO Ward Electrode Wear and Surface Pollution in Wire Bonding Process,” Tamkang Journal of Science and Engineering (淡江理工學刊), Vol. 6, No. 1, pp. 43-48, Mar. 2003. |
|
| 2001 |
SCI |
L. Yang, J. B. Bernstein, and K. Chung, “The Impact of Lead-Free Soldering on Electronic Packages,” Microelectronic International, Vol. 18, No.3, pp. 20-26, 2001. |
| |
| 國際研討會論文 |
： |
| 2022 |
2 |
Kuan-Jung Chung, Chia-Wei Lin, and Chia-Pang Hung, “Health Estimation of Railway Wheels Based on Recurrent Plots and Deep Learning Xception Model,” The 10th Asia-Pacific International Symposium on Advanced Reliability and Maintenance (APARM 2022), Hsinchu, Taiwan, Oct. 21-24, 2022. 第一作者、通訊作者 |
|
| 2019 |
EI |
Ping Wun Huang, and Kuan-Jung Chung, “The Prediction of Positioning shift for a Robot Arm Using Machine Learning Techniques,” Proceedings of the 14th International Microsystems, Packaging, Assembly, Circuits Technology Conference (IMPACT 2019), pp.204-207, 2019. |
|
| 2018 |
EI |
Jian-Hua Huang, Hui Min Cheng, Yi-Ru Li, and Kuan-Jung Chung, “Prognostic-Based Reliability Assessment of a Wafer Handling Robot Arm Using Wiener Stochastic Process Model and Monte Carlo Simulation,” Proceedings of the 24th ISSAT International Conference on Reliability and Quality in Design (RQD 2018), pp.1-5, 2018. |
|
| 2018 |
EI |
Zuo-Xiang Gan, Han-Sheng Chen, Yu-Chang Lin, and Kuan-Jung Chung, “A Novel Disposable Electrochemical Sensor Packaging with Application for the Detection of Uric Acid,” Proceedings of the 13th International Microsystems, Packaging, Assembly, Circuits Technology Conference (IMPACT 2018), pp.1-4, 2018. |
|
| 2017 |
EI |
Yu-Chang Lin, Yi-Ru Li, and Kuan-Jung Chung, “Estimating Activation Energy of the LiFePO4 Battery Using Dual Dynamic Stress Accelerated Degradation Test,” Proceedings of the 23rd ISSAT International Conference on Reliability and Quality in Design, pp. 121-125, 2017. |
|
| 2017 |
EI |
Yi-Ru Li, and Kuan-Jung Chung, “Predicting the Degradation of Li-ion Battery Using Advanced Machine Learning Techniques,” Proceedings of the 12th International Microsystems, Packaging, Assembly, Circuits Technology Conference (IMPACT 2017), pp. 462-466, 2017. |
|
| 2017 |
EI |
Kuan-Jung Chung, Yu-Chang Lin, and Bo-Han Wu, “Proactive-based Reliability Assessment of Handling Robot Arm,” Proceedings of the 2017 World Congress on Micro and Nano Manufacturing, pp.1-4, 2017. |
|
| 2017 |
2 |
Ping Wun Huang, Wen Han Zeng, and Kuan-Jung Chung, “Predicting Manpower Increase of Emergency Department for Influenza Epidemics Using Ensemble Learning Process,” The 9th Asian Conference on Emergency Medicine |
|
| 2017 |
EI |
Yi-Ru Li, and Kuan-Jung Chung, “Predicting the Degradation of Li-ion Battery Using Advanced Machine Learning Techniques,” Proceedings of the 12th International Microsystems, Packaging, Assembly, Circuits Technology Conference (IMPACT 2017), pp. 462-466, 2017. |
|
| 2017 |
2 |
Ping Wun Huang, Wen Han Zeng, and Kuan-Jung Chung, “Predicting Manpower Increase of Emergency Department for Influenza Epidemics Using Ensemble Learning Process,” The 9th Asian Conference on Emergency Medicine |
|
| 2016 |
EI |
Yu-Chang Lin, and Kuan-Jung Chung, “Predicting the Lifetimes of LiFePO4 Batteries on the Basis of the Gamma Process Through Accelerated Degradation Measurements,” Proceedings of the 2016 IEEE International Conference on Prognostics and Health Management (IEEE PHM 2016), pp. XXX, 2016. |
|
| 2015 |
EI |
Ching-Yu Chen, Rong-Fong Wu, Chun-Ying Huang, and Kuan-Jung Chung, “Lifetime Prediction of the Epoxy Resin Adhesive under the Optical Performance Degradation,” Proceedings of the 10th International Microsystems, Packaging, Assembly, Circuits Technology Conference (IMPACT 2015), pp. 400-403, 2015. |
|
| 2014 |
2 |
Yu-Chang Lin, Chueh-Chien Hsiao, Kuan-Jung Chung, ”Evaluating the Capacity Fade of Li-ion Batteries Using a Double Dynamic Stress Accelerated Degradation Test, “ 1st International Symposium on Energy Challenges and Mechanics,” Aberdeen, Scotland, United Kingdom, 8-10 July, 2014. |
|
| 2014 |
EI |
Kuan-Jung Chung, Chia-Che Wu, ”Development of a Leakage-free disposable package for biosensors immersed in the chemical solutions, Proceedings of the 9th International Microsystems, Packaging, Assembly, Circuits Technology Conference (IMPACT), and the 16th International Conference on Electronics Materials and Packaging (EMAP), pp. 763-765, 2014. |
|
| 2012 |
EI |
Kuan-Jung Chung, Shiau-Shiun Lin, Chih-Cheng Chen, and Sen-Chou Tsai,” Reliability Tests of a RFID-Based Lock for Power Meter Applications,” Proceedings of IEEE 2012 International Symposium on Computer, Consumer, and Control, pp.945-948, 2012. |
|
| 2012 |
2 |
Yu-Chang Lin, Kuan-Jung Chung, Chueh-Chien Hsiao, and Hsuan-Fu Wang ” A Novel Double Dynamic Stress Accelerated Degradation Test to Evaluate Power Fade of Batteries for Electric Vehicles,” The 1st International Conference on Intelligent Technologies and Engineering Systems (ICITES 2012), Changhua, Taiwan , Dec. 13-15, 2012. |
|
| 2012 |
2 |
K. J. Chung, C. F. Lin, W. C. Chiang, “Effect of Strain Rates on the Mechanical Behavior of Cu Thin Films of Various Thicknesses,” The 2nd International Conference on Engineering and Technology Innovation 2012. |
|
| 2008 |
EI |
Yan-Ting Chen, Kuan-Jung Chung, and Ming-Tzer Lin, “Mechanical Property Measurement of Nano-Scale Argentum Films on the Novel Paddle Cantilever Beams Using Four Step Phase-Shifting Method,” Proceedings of the 3rd International Microsystems, Packaging, Assembly and Circuits Technology (IMPACT) Conference and the 10th International Conference on Electronics Materials and Packaging (EMAP), pp.179-182, 2008. |
|
| 2008 |
EI |
Kuan-Jung Chung, Kuo-Jung Tseng, Siao-Syun Lin, Nikita Liao, and Ken-Yuan Lin, “Development and Verification of Accelerated Life Test Circuits for Tire Pressure Monitoring System,” Proceedings of IEEE 2008 Workshop on Accelerated Stress Testing and Reliability, 2008. |
|
| 2008 |
2 |
C.-J. Tong, M-T. Lin, Y.-T. Chen, Kuan-Jung Chung, and J.-S. Hsu, “Novel Mechanical Properties Measurement of Thin Films Using Paddle Cantilever Deflection,” ThinFilms 2008 and NanoMan 2008, 13-16 July, 2008, Singapore. |
|
| 2008 |
2 |
Chi-Feng Lin, Po-Hua Yang, and Kuan-Jung Chung, “Design of Hybrid Solar Concentrator,” Proceedings of the International Symposium on Solar Cell Technologies, pp. 1-3, 2008. |
|
| 2005 |
EI |
Kuan-Jung Chung, Joseph B. Bernstein, JI Luo, J. Ari Tuchman, and Zheng K. Ma, “Experimental Study for Low Resistance Interline Connections Using Pulsed Laser Techniques,” Proceedings of Quantum Electronics and Laser Science Conference (QELS), v 3, pp. 1564-1566, 2005. |
|
| 2004 |
2 |
Anthony L. Wilson, J. Luo, J. B. Bernstein, J. A. Tuchman, Hu Huang, and Kuan-Jung Chung,” A Continuous-Time Laser Programmable Analog Array for Radiation Environments,” The 7th Annual MAPLD International Conference, Sep. 8-10, 2004, Washington D. C., USA. |
|
| 2002 |
EI |
Ji Luo, Kuan-Jung Chung, Hu Huang, and J. B. Bernstein, “Temperature Dependence of R(on,sp) in Silicon Carbide and GaAs Schottky Diodes,” Annual Proceedings of IEEE International Reliability Physics Symposium, pp. 425-426, 2002. |
|
| 2001 |
EI |
Ji Luo, Kuan-Jung Chung, Hu Huang, and J. B. Bernstein, “Comparison Silicon Carbide Schottky Diodes,” Proceedings of 2001 IEEE GaAs Reliability Workshop, pp.13-14, 2001. |
| |
| 國內研討會論文 |
： |
| 2020 |
|
黃建樺、鍾官榮，”利用LSTM 機器學習模型進行晶圓取放機械手臂之最大偏移量預測，” 中國機械工程學會第三十六屆全國學術研討會論文集，台北，中華民國一百零九年十二月。 |
|
| 2019 |
|
王順正、張起明、鍾官榮，”生物晶片的可靠度分析與評估，” 中華民國品質學會第55屆年會暨2019 國際品質管理研討會（ISQM）論文集，桃園，中華民國一百零八年十一月。 |
|
| 2019 |
|
吳嘉興、王順正、鍾官榮、鄧妤庭，”車用ADAS 晶片的可靠度分析與評估，” 中華民國品質學會第55 屆年會暨2019 國際品質管理研討會（ISQM）論文集，桃園，中華民國一百零八年十一月。 |
|
| 2017 |
|
張煜森、鍾官榮，”利用人工智慧法組合學習過程進行咖啡機的預測維護分析，”中華民國品質學會第53屆年會暨2017國際品質管理研討會（ISQM）論文集，桃園，中華民國一百零六年十一月。 |
|
| 2017 |
|
甘佐祥、鍾官榮，”新型電化學生醫感測器之封裝與檢測驗證研究，”第二十屆全國機構與機器設計學術研討會論文集，彰化，中華民國一百零六年十一月。 |
|
| 2017 |
|
鄭惠敏、鍾官榮，”應用類神經網路預測工業用高壓斷路器的絕緣電阻值與維修時機，”第二十屆全國機構與機器設計學術研討會論文集，彰化，中華民國一百零六年十一月。 |
|
| 2017 |
|
黃炳文、曾玟瀚、鍾官榮，” 以氣候條件為主要因子之流感病患盛行率風險評估，” 台灣急診醫學會2016年冬季學術討論會論文集，高雄，中華民國一百零五年十二月。 |
|
| 2016 |
|
何照偉、鍾官榮，” 應用機器學習之決策樹方法提高FMEA中嚴重度風險指標評分分級之準確度，” 2016年國際品質管理研討會論文集，台南，中華民國一百零五年十一月。 |
|
| 2015 |
|
吳柏翰、鍾官榮，”可撓式金屬添加物/石墨烯超級電容器製備及彎曲疲勞特性研究，”中華民國力學學會第39屆全國力學會議論文集，台北，中華民國一百零四年十一月。 |
|
| 2015 |
|
甘佐祥、鍾官榮，”利用Gamma隨機過程衰退模型預估磷酸鋰鐵動力電池之老化壽命，”中國機械工程學會第三十二屆全國學術研討會論文集，高雄，中華民國一百零四年十二月。 |
|
| 2015 |
|
林柏成、鍾官榮，” 磷酸鋰鐵動力電池之加速老化測試及壽命預估，”中國機械工程學會第三十二屆全國學術研討會論文集，高雄，中華民國一百零四年十二月。 |
|
| 2014 |
|
李竣煒、鍾官榮，”應用田口法於鋰電池在不同溫度及脈衝充電最佳化參數之研究，”中國機械工程學會第三十一屆全國學術研討會論文集，台中，中華民國一百零三年十二月。 |
|
| 2014 |
|
藍永森、鍾官榮，”應用新雙動態應力加速試驗於磷酸鋰鐵動力電池之老化壽命預估，”中國機械工程學會第三十一屆全國學術研討會論文集，台中，中華民國一百零三年十二月。 |
|
| 2014 |
|
張榮吉、黃敬洲、鍾官榮，" 維修精密定位環之振動分析，" 中華民國振動噪音工程學會第22屆學術研討會論文集，彰化，中華民國一百零三年六月七日。 |
|
| 2013 |
|
曾致豪、鍾官榮，"以黃光微影製程製作表面聲波無線射頻標籤之研究，" 2013 第七屆智慧型系統工程應用研討會，台南，中華民國一百零二年五月。 |
|
| 2011 |
|
邱俊瑋、鍾官榮、吳嘉哲，” 碟閥性能量測系統之研製，” 中國機械工程學會100年度暨第28屆全國學術論文集，頁1-7，中華民國一百年十二月(論文編號：C10-010)。 |
|
| 2010 |
|
蔡銘吉，鍾官榮，”磷酸鋰鐵電池之充放電系統製作與溫度對電池性能影響之研究，”2010安全管理與工程技術國際研討會(ICSSMET2010)，嘉義，中華民國九十九年十一月(Acceppted)。 |
|
| 2009 |
|
鍾官榮、林孝勳，”胎壓監控系統加速壽命測試電路之研製，” 2009第八屆可靠度與維護度技術研討會，雲林，中華民國九十八年五月二十二日。 |
|
| 2009 |
|
張榮吉、褚政怡、郭永源、張右龍、鍾官榮，”車電產品之溫度效應影響可靠度預估分析，” 2009第八屆可靠度與維護度技術研討會，雲林，中華民國九十八年五月二十二日。 |
|
| 2009 |
|
江偉成、林奇鋒、鍾官榮、楊博華，”金屬薄膜於不同應變速率下之機械性質分析，” 2009精密機械與製造科技研討會，屏東，中華民國九十八年五月二十二日。 |
|
| 2008 |
|
吳嘉哲、宋孟桓、陳麗同、鍾官榮，”鋯鈦酸鉛薄膜之性質量測及其在發電裝置應用之研究，”2008彰雲嘉院校聯盟學術研討會，彰化，中華民國九十七年十二月五日。 |
|
| 2008 |
|
陳法志、林奇鋒、鍾官榮，”Rulon工程塑膠在不同荷載速率下之機械性質分析，” 2008彰雲嘉院校聯盟學術研討會，彰化，中華民國九十七年十二月五日。 |
|
| 2007 |
|
Kuan-Jung Chung, and Joseph B. Bernstein, “Electromigration Evaluation of the Micorbridge Process for Low Resistance Interline Connectors in ICs,” 中華民國第七屆可靠度與維護度技術研討會，新竹，中華民國九十六年六月。 |
|
| 2007 |
|
Kuan-Jung Chung, J. B. Bernstein, and M. Peckerar, “Design Optimization of the Laser-Formed Microbridge for Low Resistance Interline Connection,” 11th Nano and Microsystem Technology Conference, Aug. 2007, Taichung, Taiwan. |
|
| 1997 |
|
鍾官榮，羅斯維，洪祖成，”金屬成形低速潤滑之實驗探討，”中國機械工程協會第14屆學術研討會，桃園，中華民國八十六年十二月。 |
|
| 1997 |
|
Sy-Wei Lo, and K. Chung, “Development of Smooth Engineered Surfaces by Internal-Ironing Process,” 中國機械工程協會第14屆學術研討會，桃園，中華民國八十六年十二月。 |
| |
| 專利 |
： |
| 蔡森洲、鍾官榮、陳志成、王萱?、林孝勳，”封印鎖，” 中華民國發明專利，證書號數：I388712，專利期間：2013/03/11~2030/08/09。 |
|
| 鍾官榮、吳柏翰，”工具機具殘餘使用壽命預測系統及其方法，” 中華民國發明專利，證書號數：I639907，專利期間：2018/11/01~2037/06/05，(MOST 106-2622-E-018-001 -CC2)。 |
|
| 蔡森洲、陳志成，鍾官榮 ”耐高溫無線射頻辨識標籤盒，” 中華民國新型專利，證書號數：M453199，專利期間：2013/05/11~2022/12/13。 |
|
| 蔡森洲、鍾官榮、陳志成、王萱?，”射頻辨識封印鎖，” 中華民國新型專利，證書號數：M398560，專利期間：2011/02/21~2020/09/28。 |
|
| 鍾官榮、邱俊瑋，” 碟閥性能量測系統，” 中華民國發明專利，證書號數：I439665，專利期間：2014/06/01~2031/05/12，(NSC 99-2622-E-018 -002 -CC3)。 |
|
| 鍾官榮、林育漳，”表面聲波元件的腔體形成方法，”中華民國發明專利，證書號數：I501549，專利期間：2015/09/21~2033/12/10。 |
|
| 鍾官榮、李欣蓓，” 立體堆疊晶片封裝方法，”中華民國發明專利，證書號數：I539569，專利期間：2016/06/21~2033/12/08。 |
|
| 鍾官榮、林育漳， ”垂直存取式的藥物篩選裝置，”中國大陸新型專利，專利號：ZL 2015 2 0063540.4，專利期間：2015/01/29~2025/01/28。 |
|
| 鍾官榮、林育漳，” 多向性表面聲波無線辨識模組，” 中華民國發明專利，證書號數：I501158，專利期間：2015/09/21~2033/08/15。 |
|
| 鍾官榮、林育漳，”防滲液的生化試片以及其製備方法，”中華民國發明專利，證書號數：I500928，專利期間：2015/09/21~2034/03/03。 |
|
| 鍾官榮、林育漳、劉衍宗， ”離心式定量點藥取放裝置，”中華民國發明專利，證書號數：I551350，專利期間：2016/10/01~2035/02/09。 |
|
| 鍾官榮、林育漳， ”垂直存取式之藥物篩選裝置，”中華民國新型專利，證書號數：M502174，專利期間：2015/06/01~2025/01/19。 |
|
| 鍾官榮、林育漳、劉衍宗， ”汲取式定量點藥取放裝置，”中華民國發明專利，證書號數：I555578，專利期間：2016/11/01~2035/01/19。 |
|
| 鍾官榮、林育漳、劉衍宗， ”離心式定量點藥取放裝置，”中國大陸發明專利，專利號：ZL 2015 1 0081566.6，專利期間：2015/02/15~2035/02/14。 |
|
| 鍾官榮、林育漳、劉衍宗， ”汲取式定量點藥取放裝置，” 中國大陸發明專利，專利號：ZL 2015 1 0043526.2，專利期間：2015/01/28~2035/01/27。 |
|
| 鍾官榮、吳柏翰，”工具機具殘餘使用壽命預測系統及其方法，” 中華民國發明專利，證書號數：I639907，專利期間：2018/11/01~2037/06/05，(MOST 106-2622-E-018-001 -CC2) |
|
|
|
